TruClimate 100
Water-to-Water Domestic Hot Water Heat Pump
High efficiency dedicated heat recovery operation for domestic hot water. Units have been rigorously tested and are NSF/ANSI/CAN 61 certified. By utilizing a pre-heat strategy for hot water, you can reduce your operating costs by 20%*.
High Efficiencies Through Dedicated Heat Recovery
By utilizing a pre-heat strategy for hot water, you can reduce your operating costs by 20%*. The TruClimate 100 Domestic Hot Water Chiller can reduce the load on the cooling tower, reduce energy consumption, save money and address the energy side with pre-heat.
NSF61 Certified
The TruClimate 100 Domestic Hot Water Chiller is NSF/ANSI/CAN 61 certified. With UL listing this Certification, you can be assured that the TruClimate Domestic Hot Water Chiller has been tested by a trust-worthy third-party certification body to provide potable hot water for any use.
Building Electrification Instead of Fossil Fuels
The TruClimate 100 Domestic Hot Water Chiller doesn't rely on natural gas, which helps the building owner to reduce fossil fuel consumption and their carbon footprint impact on the environment. Heat that is wasted through a cooling tower or ground loop is instead recovered and used for hot water pre-heat.
Domestic Hot Water
Our storage tanks are UL Certified for electric water heaters and water storage come with factory-installed temperature/pressure relief valves. The tanks are glass-lined with primary and secondary aluminum anode rods which provide maximum protection against corrosion. The brass tamper-resistant drain valve provides durability and longer life than plastic valves.
Serviceability Benefits
Our control panel was designed with the technician in mind to provide convenient, clear wiring with plenty of working space. The panel is split into a left and right side with access to both for ease of service.
Quality Components for Efficient Operation
Oversized true brazed plate heat exchangers offer high efficiency with industry-low waterside pressure drop while dual scroll compressor technology provides consistent reliability and efficiency.
Other Key Features
Factory-Installed Options
A factory-installed pressure/temperature port is externally accessible for improved serviceability while factory-installed high accuracy sensors measure system pressures and temperatures. Factory mounted, internally wired non-fused disconnect is also available.
Noise-Dampening Features
The compressor suction/discharge tubes come with a braided stainless steel vibration absorber to dampen compressor vibration on system piping resulting in quiet operation.
Phase Guard Monitor
Provides phase reversal, phase imbalance, and loss of phase protection.
| Model (60Hz) |
Heating | Cooling | Combined Cycle COP |
|||||||
| Flow (GPM) |
ELWT | LLWT | Capacity | COP | Flow (GPM) |
ELWT | Capacity | EER | ||
| NXW120D | 20 | 110 | 125 | 179.9 | 3.7 | 30 | 70.0 | 131.8 | 9.3 | 6.5 |
| 161.0 | 3.4 | 55.0 | 113.6 | 8.2 | 6.0 | |||||
| 120 | 118.0 | 2.6 | 35.0 | 73.0 | 5.5 | 4.6 | ||||
| NXW180D | 30 | 110 | 125 | 253.1 | 3.9 | 45 | 70.0 | 188.6 | 10.0 | 6.9 |
| 228.2 | 3.6 | 55.0 | 165.1 | 8.9 | 6.4 | |||||
| 120 | 170.2 | 2.9 | 35.0 | 111.5 | 6.5 | 5.1 | ||||
| NXW240D | 40 | 110 | 125 | 327.2 | 3.8 | 60 | 70.0 | 241.6 | 9.6 | 6.7 |
| 292.0 | 3.5 | 55.0 | 209.4 | 8.7 | 6.2 | |||||
| 120 | 211.8 | 2.8 | 35.0 | 136.7 | 6.2 | 5.0 | ||||
| NXW360D | 60 | 110 | 125 | 467.3 | 3.7 | 90 | 70.0 | 341.4 | 9.3 | 6.5 |
| 426.3 | 3.5 | 55.0 | 303.8 | 8.5 | 6.2 | |||||
| 120 | 328.5 | 2.9 | 35.0 | 214.9 | 6.5 | 5.1 | ||||